Use the following instructions to re-load your simple use camera:
- Once your camera counter window reads 0, remove the sticker on the side of the camera to access the film door release.
- Remove your exposed roll of film.
- Remove the AA battery and replace with a new one.
- Insert a new roll of film on the right cavity.
- Pull the film to the left across the exposure window and line up the sprockets with the notch on the left spool and above the exposure window.
- (Optional) You can use a small piece of tape to secure the leader to the left spool.
- Close the film door
- Use the winding knob on the bottom of the camera and follow the direction of the arrows turning counter clockwise.
- Wind up until the counter window reads as the amount of exposures in your film. The camera can go up to 36 exposures.
- Once you feel some resistance, stop winding.
You are now ready to use your camera with new film!